Hope V6Ti Mono Edition

Beskrivelse

To mark 20 years since the original Mono 6Ti, Hope are releasing a Special Mono Edition. Limited to 1,000 brake sets. It will feature a distinctive black and gold colourway, inspired by the original, along with a special etch, and a unique serial number, making each set a true collector’s item.

Mono Edition Box set

• A Pair of EVO V6Ti Mono Edition Brakes (etched with the edition number)
• 2x T Slot Vented Rotors
• Additional power lever blades
• All mounts and hardware
• Additional brake pads
• V6Ti Key ring and Unique Mono Edition Edition Card

Introducing the EVO V6Ti: An evolution of one of Hope’s most iconic brakes. Reimagined for the modern day, the EVO V6Ti delivers exceptional braking power, advanced heat management, and in the unmistakable Hope design, setting a new standard for riders who demand the very best braking whether riding downhill, enduro, or e-bike.

At the heart of the system is a single piece CNC-machined caliper, designed to achieve the ultimate stiffness-to-weight ratio while maximizing surface area for more effective heat management. Inside, titanium pistons provide outstanding performance when it matters the most. Each piston is Ti-Nitride coated to reduce friction and improve durability, while a cross drilled design enhances cooling.

A radial mount design removes post-mount constraints, allowing for a larger caliper body, bigger pistons, and pads. The result is consistent, confidence inspiring braking, even under prolonged and extreme conditions.

The EVO V6Ti is paired with the new T-slot Vented Rotor, designed specifically to aid heat management. Cooling fins between the braking surfaces significantly reduce rotor temperatures, while the T-slot floating design allows the outer rotor to fully float, preventing distortion under load. For added practicality, the outer rotor is replaceable, eliminating the need to replace the entire rotor when it wears.

Completing the system is the EVO Master Cylinder (www.hopetechhb.com/evo), Hope’s latest and most refined master cylinder yet.

The EVO V6Ti is a statement of engineering excellence and a benchmark for braking performance.

V6Ti  Features

• Single piece CNC machined caliper
• Ultimate stiffness to weight ratio
• Large surface area to manage heat
• Titanium pistons, for consistent performance in the most extreme conditions
• Ti-Nitride coated for low friction and increased wear resistance
• Cross drilled pistons to help cooling
• Uses a radial mount to remove the dimensional restrictions associated with the post mount standard : More space, more piston surface area, more power / Larger pad = more consistency  / Larger caliper = increased stiffness, better heat management
• Only compatible with one of the dedicated brake mounts / requires +20mm disc diameter
• Only compatible on Postmount forks and frames (PM180-PM200-PM203) with Ø200 or Ø220 discs
• Only compatible with 2.3mm and 3.3mm (vented) discs

T-Slot Rotor Features

• Our highest performing disc, desgined specifically for our V6ti
• Outer is constructed from three pieces to create a gap between the external braking surfaces
• Vented outer is replaceable
• The rotor uses internal fins to allow the air to flow between the two friction parts, the induced air flow significantly reduces heat buildup in the rotor.
• Allows direct mounting of E-Bike speed sensor magnet
• Dyno tests show up to 15% less heat buildup compared to our floating rotors
• Vented outer is joined to aluminium centre allowing 1 degree of freedom in a true floating design
• 3.3mm disc thickness, minimum thickness 2.9mm